2 PCS TEC1-12706 12V 60W Thermoelectric Cooler TEC Peltier Plate Module US

Description

2 PCS TEC1-12706 12V 60W Thermoelectric Cooler TEC Peltier Plate Module US
Item Features :
Thermoelectric coolers (TECs or Peltier elements) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. They have no moving parts, and can be switched from heating to cooling by simply reversing the polarity of the input voltage.
These TEC1-12706 60W 12V Peltier thermoelectric coolers are perfect for application requiring heating or cooling such as small DIY refrigerators, custom drink heaters/coolers and electronic component and device chillers or heaters.
TECs work very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, and the cold side will cool quickly. If you do not remove the heat from the hot side with a heat sink or other device, it will overheat and fail. As with all TECs, this cooler must be mounted to a heatsink before applying power to it. Failure to do so may result in device failure, and will present a burning hazard (the heating side will get very hot, quickly).
The maximum power (voltage x current) applied to this device must not exceed 60 Watts, and at this power level will require a substantial air- or water-cooled heatsink with thermal compound in order to remove the heat from the device.
Model: TEC1-12706
Size: 40mm x 40mm x 4mm
Working current: 4.3-4.6 A (rated 12V); Imax: 6A
Rated voltage: 12V DC, Vmax: 15V
Operates from 0~15V DC and 0~6A
Maximum Power Consumption: 60 Watts
Maximum Refrigeration Power Qcmax at △Tmax: 60W
Tmax (maximum temperature difference between cold and hot side of the module): 66°C Fitted with 12-inch (approx.) insulated leads
The side with the words is the cooling side, and the other side is the heating side. It can be changed from heating to cooling, or cooling to heating, by simply reversing the input voltage polarity.
Package Includes :
2 X Peltier Pad
NOTE: *SORRY! PICK UP IS NOT ALLOWED!*
Kindly compare your original item with the photos provided for the listing to make sure that you are purchasing the correct part. Please be informed that we do not hold any responsibility for damages caused by wrong installation or wrong purchase.
If you have any questions or clarifications regarding the item,please don't hesitate to ask before purchase.
SHIPPING INFORMATION
For
INTERNATIONAL
orders, please be advised that we
cannot
guarantee exact delivery date. It may vary depending on your local customs/post office regulations.
Kindly contact us if you require any further assistance and we'll be glad to assist you.
TERMS AND RETURN POLICY
Change Address
-
If you are requesting to change your address, please let us know ahead of time. Otherwise, your order will be shipped to the address that you provided in your eBay/PayPal record.
Cancelled Transactions
-
We can cancel transactions, just let us know so we can process it immediately. We might provide an RMA number or further instructions if in case the item was already shipped.
Received Wrong Item/Not as Described
- We're humans and we intermittently commit mistakes but we are keen to correct them, in a way that the buyer prefers. If the item received was wrong or not the same as shown in the product listing photos, we will require you to send actual photo/s of the item received, along with its packaging (showing the label on the package). This is our SOP, for us to be certain and for record purposes.
DOA/Damaged Upon Receipt
- We make sure our items are properly packaged before shipping to avoid damages on the item. In case you received a damaged item, which might have been caused by shipping, please send us photos of the received item along with its packaging (showing the label on the package) for us to check and report immediately to our shipping department so they can take further action.
Defective/Incompatible
- We get our items in bulk so there is a little chance that some would be defective. We require you to send us photo/s of the item received and also your original item (for incompatibility issues) so we can compare the items and conduct necessary actions. If you feel like you need to return an item, please let us know the
REASON
so that we can provide RMA instructions.
If any of these did not answer your concern, please contact us through "MY MESSAGES" or "ASK SELLER QUESTIONS"
and we'll be glad to assist.