-40%

3D Printed Universal EZ Battery Mount for Oculus Quest 2 BoBoVR M2 Head Strap

$ 9.47

Availability: 100 in stock
  • Condition: New
  • Country/Region of Manufacture: United States
  • All returns accepted: ReturnsNotAccepted
  • Brand: Unbranded
  • Type: Battery Mount
  • Year Manufactured: 3D Printed
  • Material: PETG
  • Manufacturer Warranty: None
  • Compatible Model: Quest 2

    Description

    3D Printed
    Universal Battery Mount with
    EZ
    Sliding In and Out
    Mechanism for
    Oculus Quest 2
    BoBoVR M2 Halo Style Head Strap
    .
    In order to extend the usage duration of your Quest 2, adding a power bank to charge the Quest 2 during use is a must have. A 10000mA power bank will keep the usage duration of the Quest 2 to about 6 hours. Here is an EZ battery mount for the integration of the power bank with your Quest 2.
    There is
    an
    openings
    for USB cable Type-A header to "
    park
    " when they are not connected to the battery. The USB cable won't float around while the battery is charging or away any more.
    This battery mount:
    1. Works with your
    BoBoVR M2
    Halo Style Head Strap
    to provide an easy way to mount a 10000mA - 13000mA power bank on your Quest 2 (tested and verified with GOMRVR Head Strap).
    2. The
    battery mount base
    is installed at the back of head strap easily (You need to install the
    optional top strap
    to secure the battery mount
    ).
    3. Use Velcro hook and loop straps to tighten your
    power bank on the battery mount plate
    .
    4.
    Slide
    in the battery mount plate into the base
    5. Connect USB cable from the power bank to the Quest 2
    With our design, you can slide in and take out the power bank in under 5 seconds. You don't have to undo the Velcro straps to insert or remove the power bank from the Quest 2 for charging or other purpose.
    Here's what's included in this package:
    1.
    A Battery Mount Base
    2.
    A Battery Mount Plate
    3.
    Two 3/4" wide 8" Long
    Velcro Hook and Loop Straps
    (Vertical Wraps) and
    one 1/2" or 3/5" wide 14" Long
    Velcro Hook and Loop Strap
    (
    Horizontal Wrap). Please measure the vertical and horizontal perimeters/circumferences of your power bank - the dimensions should be smaller than 6.5" and 12.5" respectively for these straps.
    4. Bonus:
    Two
    1/2" wide 4" Long Velcro Hook N Loop Straps
    to manage the USB cable
    are also included
    The Mount Base and Plate were printed with Overture PETG that is stronger and more durable than regular PLA. Testing was performed with two 10000mA power bank with the dimensions of 5.75"x2.5"x0.5" and 3"x2.25"x1".
    The Oculus Quest 2, power banks, USB cable, Cable Clips and Halo Head Straps are not included. This Battery Mount
    was designed by our in-house designer.
    P.S: "Support"
    feature
    is used in the print. That might leave the uneven bottom on the prints and is normal.