Thorlabs PAF-X-7-A Fiber Port Collimator FC/PC and FC/APC 350-700nm, f=7.5 mm

Description

This listing is for
used
Thorlabs FC/PC and FC/APC fiber port collimator. The item is fully functional with no defects. For physical condition please refer to the pictures. For more information please refer to Thorlabs official documents:
www.thorlabs.com/catalogpages/obsolete/2018/PAF-X-7-A.pdf
www.thorlabs.com/_sd.cfm?fileName=16164-D02.pdf&partNumber=PAF-X-7-A
These compact, ultra-stable FiberPort micropositioners provide an easy-to-use, stable platform for coupling
light into and out of FC/PC, FC/APC, or SMA terminated optical fibers. It can be used with single mode,
multimode, or PM fibers and can be mounted onto a post, stage, platform, or laser. The built-in aspheric or
achromatic lens is available with three different AR coatings and has five degrees of alignment adjustment (3
translational and 2 pitch). The compact size and long-term alignment stability make the FiberPort an ideal
solution for fiber coupling, collimation, or incorporation into OEM systems.
Features:
5 Degrees of Freedom plus Rotational Adjustment
Micropositioning Alignment for Collimation or Coupling
FC/PC, FC/APC, and SMA Versions
FC/PC and FC/APC Versions Accept Both 2.1 mm Wide Key and 2.0 mm Narrow
Key Connectors
SMA FiberPorts are Designed for SMA905 Connectors
Available with Either an Aspheric or an Achromatic Lens
Suitable for Single Mode, Multimode, and Polarization-Maintaining (PM) Fiber
AR Coating Options for Visible, NIR, and MIR Wavelength Ranges (See
Selection Guide
Tab for Details)
Thorlabs' compact, ultrastable FiberPort micropositioners provide an easy-to-
use platform for coupling light into and out of optical fibers. This device enables
alignment to an FC/PC-, FC/APC-, or SMA-terminated fiber with six directional
adjustments. The compact size, combined with the ultrastable alignment and
locking mechanism (detailed in the
Operation
tab), makes the FiberPort an
ideal solution for fiber coupling or collimation.
Five Degrees of Freedom (Plus Bulkhead Rotation)
While holding the connector and fiber stationary, the built-in lens can be
aligned with five degrees of freedom: linear alignment of the lens in the X and
Ultrastable Micropositioning Alignment with Five Degrees
of Freedom Plus Rotation Adjustment
Usable with SM, MM, and PM Fiber
Aspheric or Achromatic Lens
Models Available for 350 nm - 5 μm
Y, angular alignment for tip and tilt, and Z adjustment using the tip and tilt controls simultaneously (see the
Mechanism
tab for complete details and an
illustration). The travel range of the aspheric lens in the X/Y and Z directions is ±0.7 mm and ±0.4 mm, respectively, with a resolution of 0.012" (0.32 mm) per
revolution. The tip/tilt travel range is ±4° with a resolution of 1.32° (23 mrad) per revolution. In addition, the locking screws on the front plate can be loosened to
enable rotation of the bulkhead for PM fiber alignment. After alignment is complete, a locking setscrew can be tightened to secure the position. Please contact
Tech Support for complete instructions regarding bulkhead adjustment.
PRSP 9.00
Please ask questions before bidding.
Due to the nature of product it is sold as is with
no return
!
Worldwide expedited shipping is .95
except Russia. Attention: we don't ship to Russia anymore. All orders with Russian shipping addresses will be cancelled!
Payment is due within 3 days.
Buyer is responsible for all local taxes and customs fees whenever applicable.
Please note: the listing is for crystal only! All other auxiliary items shown at the pictures are for demonstration purposes and NOT INCLUDED with this lot.
Please check out my
other items
! and thanks for looking